In order to make the toilet paper machine work normally, a safe operation system for equipment maintenance should be formulated to ensure the long-term safe operation of the toilet paper machine. At the same time, there must be necessary maintenance tools, grease and corresponding accessories. When the grinding roller device of the toilet paper machine has been used for more than 500 hours or so, when the grinding roller is replaced, the rolling bearings in the roller sleeve must be cleaned, and the damaged parts should be replaced in time.
1. Lateral movement The lateral movement allows the trimming to be adjusted to an appropriate width. The minimum trimming width of the toilet paper machine is 20mm per side on average. If the trimming is too narrow, the process of entering the straw will become difficult and may cause the paper web to break. .
2. Longitudinal movement Longitudinal movement is the movement of the parent roll in the direction of the paper web. By moving the rewinding frame on the operating side of the toilet paper machine forward or backward, it is possible to balance the paper web tension deviation on the transmission side and the operating side. When making adjustments, the condition of the web must be observed.
3. Separate crawling for unwinding The separate crawling for unwinding is used when you just want to rotate the parent roll in the unwinding area, and you can make some preparations, such as threading or splicing, when the parent roll crawls independently. Use the control switch to turn on the independent crawling of the toilet paper machine. The rotation direction of the independent crawling is selected by the potentiometer. The center position of the potentiometer is the zero point of the crawling. When turning left from the center, turn it counterclockwise. When turning right, press Turn clockwise.
In the process of using the toilet paper machine, there should be fixed personnel to take care of it, and the operator must have a certain technical level. Before the toilet paper machine is installed, the operator must have the necessary technical training, so that they can understand the principle and performance of the toilet paper machine and be familiar with the operating procedures.
