Craft Paper Slitting And Rewinding Machine

The Craft Paper Slitting And Rewinding Machine needs to perform fixed-length slitting processing of the entire roll or the entire raw material, such as plastic packaging materials, packaging cartons, steel plates, films, leather, wood chips, etc. The slitting length can be set continuously. If there is an error in the actual slitting length, it is easy to calibrate by setting parameters. The slitting control of the slitting and rewinding machine is divided into static and dynamic slitting: when the set length is reached, it will stop accurately, then statically slit, and restart after slitting; when the set length is reached, the slitting signal is sent out without stopping, and the slitting machine dynamically slits and processes during the material movement.
The central part of the Craft Paper Slitting And Rewinding Machine is installed with a main shaft for processing paper tubes. The front end of the main shaft is fixed on the base with a set of bearings, and a pulley is installed in the middle of a set of bearings. A compression cylinder is installed near the base, and the cylinder supports a set of support rod bearings is installed on the upper end of the rod to support the main shaft.
A main cutter shaft is installed on the upper end of the slitting and rewinding machine, and a number of blades are arranged on it, and they are arranged according to a certain gap; the support frame of the main cutter shaft is also set at the top of the slitting and rewinding machine. A support cylinder is installed in the middle. The structural advantages of the Craft Paper Slitting And Rewinding Machine fill the technical gap of the automatic pipe cutting machine.